Broward County, Florida

Miami-Dade Approved Impact Windows & Doors in Broward County

Every window and door Smart Replace Corp installs carries a Miami-Dade County product approval, and the approval number is printed next to each opening on your estimate. Here is what that number actually covers, and why your city asks for it.

What “Miami-Dade approved” means

Miami-Dade County runs its own product approval program, separate from a manufacturer's marketing claims. A product is tested, the results are reviewed by the county, and if it passes, a Notice of Acceptance is issued. The NOA is a public document with a number, and that number is what a building department looks up.

The testing covers the assembly, not just the glass: large missile impact, uniform static air pressure and cyclic wind pressure loading. That is why the approval names a product and series rather than a generic description like “impact window.”

Why Broward County requires it

Broward and Miami-Dade together make up Florida's High Velocity Hurricane Zone. The Florida Building Code requires wind-borne debris protection in that region, and the building department confirms it at permit review and again at inspection. A permit for openings that are not protected, or are protected by a product that does not match the submitted approval, will not close out.

The requirement follows the address, not the contractor. Two houses on the same street can need different design pressures, and a beachfront elevation usually needs more than the inland side of the same building.

What the approval number on your estimate tells you

  • The product and series being installed, not a generic product category.
  • The maximum size the approval covers for that unit.
  • The design pressure the assembly is approved for at your address.
  • The installation method the NOA describes, which the crew has to follow.

If a proposal lists one approval number for the whole house, or none at all, ask which product each opening is getting. The number should change when the product changes.

How we use it on your project

We measure each opening on site, work out the design pressure for that location, and select a product whose approval covers both the size and the pressure. The approval number goes on the estimate next to the opening, into the permit submittal, and into the documents the inspector checks. Permits and inspections are handled by Smart Replace Corp under Florida license CC 15-G-17728-X.

How to read a Miami-Dade NOA

Smart Replace Corp

  • Miami-Dade approved products
  • Approval number listed per opening
  • Permits and inspections handled
  • Florida license CC 15-G-17728-X

1451 W Cypress Creek Rd #300
Fort Lauderdale, FL 33309

954-658-4298

Keep reading

Questions

Product approval: common questions

Something not answered here? Call 954-658-4298 and we will walk through it with you.

Is Miami-Dade approval required in Broward County?

Broward County sits inside Florida's High Velocity Hurricane Zone, and the Florida Building Code requires wind-borne debris protection in that region. The product approval is what your city's building department reviews with the permit, so the number has to match the product going into each opening.

What is a Miami-Dade NOA?

A Notice of Acceptance is issued by Miami-Dade County after a product passes the testing the county requires, which includes large missile impact, uniform static air pressure and cyclic wind pressure loading. The NOA states the product and series it covers, the sizes it may be installed at, and the design pressure it is approved for.

Does the approval cover my exact window size?

Not always. An approval covers a product up to a maximum size and a maximum design pressure. A larger opening, a taller unit or a higher required pressure can need a different product or an engineered detail. That is why we check each opening rather than assuming one rating covers the whole property.

How can I verify an approval number?

Miami-Dade County publishes its product approvals in a public database, so any number can be looked up. The same number appears on the permit documents and on the estimate we give you, next to each window and door.

Does an approved product mean the installation is approved?

No. The approval covers the product as it was tested, including the installation method described in the NOA. The installation has to follow that method, and that is part of what the inspection checks before the permit is closed.

Free estimate for your Broward County property

Itemized by opening, with the approval number listed for every unit.

Book your free estimate